Details
Manufactured by M.C.E these are a vintage toggle switch, a similar pattern as used on many UK manufactured amps in the 1950's and 60's.
They are 4 pole on - off, so up to 4 circuits can be broken / made at the same time - of course not all 4 poles need to be used.
Rated at 250V 2A, with solder tag connections which protrude from the sides of the switch body - not from the bottom which is more common nowadays.
Dimensions of the body are approximately 25mm x 22mm x behind panel depth of 17mm.
Chrome plated actuator with a chrome plated mounting which requires a 12mm panel hole.
Ideal for anyone wanting to renovate vintage equipment with new unused original period parts.
They are 4 pole on - off, so up to 4 circuits can be broken / made at the same time - of course not all 4 poles need to be used.
Rated at 250V 2A, with solder tag connections which protrude from the sides of the switch body - not from the bottom which is more common nowadays.
Dimensions of the body are approximately 25mm x 22mm x behind panel depth of 17mm.
Chrome plated actuator with a chrome plated mounting which requires a 12mm panel hole.
Ideal for anyone wanting to renovate vintage equipment with new unused original period parts.